Enshrouded Dedicated Server Requirements

Planning an Enshrouded server? These are the hardware, network, and port requirements you need for a smooth co-op experience, broken down by how many players you want to support — and mapped to the ready-made Flux hosting plans.

Quick answer

An Enshrouded dedicated server needs at least 4 CPU cores and 4 GB of RAM for a small group, scaling to 8 GB of RAM for a full 16-player world. It also needs UDP ports 15636 and 15637 open, and around 10–30 GB of fast SSD storage. Enshrouded is far more RAM- and CPU-sensitive than bandwidth-sensitive, so prioritise memory and clock speed.

CPU requirements

Enshrouded world simulation — terrain deformation, physics, and AI — runs largely on the CPU, and it favours per-core speed as much as core count. A modern 4-core CPU handles a small server, but for 8–16 active players building and fighting simultaneously, aim for 6 or more modern cores. Under-powered CPUs show up as rubber-banding and delayed resource harvesting rather than low frame rates, because the server tick can no longer keep pace with the players.

RAM requirements by player count

Memory is the resource you will run out of first. Enshrouded loads more of the world into RAM as players explore and build in separate areas, so memory use grows with both player count and how developed your world is. Use this table as a baseline:

PlayersRecommended RAMFlux plan
Up to 44 GBSmall group
Up to 86 GBMedium group
Up to 168 GBFull server

If you expect a heavily-built, long-running world, size up one tier from these numbers. Running out of RAM causes the server process to stutter or crash, which is far more disruptive than paying for a little headroom.

Storage requirements

The server binaries are small, but save files, backups, and logs accumulate over a long-lived world. Budget 10 GB minimum and 30 GB for a comfortable margin, and strongly prefer SSD or NVMe storage — world saves are written frequently, and slow disks turn autosaves into visible hitches. Every Flux plan uses SSD/NVMe storage.

Network and port requirements

Enshrouded is not bandwidth-intensive; a stable connection with 10+ Mbps upload comfortably serves a full lobby. Latency matters more than raw throughput, which is why choosing a server region close to your players is the single biggest connection-quality lever. What you must get right is the ports:

PortProtocolPurpose
15636UDPGame traffic (default)
15637UDPQuery / server browser

Both are UDP and both must be reachable from the internet. If they are blocked or un-forwarded, your server simply will not appear in the browser and friends cannot connect. Managed Flux servers open and route these for you automatically, so there is no router configuration to do.

Operating system

The Enshrouded dedicated server is a Windows application. It runs on Windows Server 2016 or newer directly, and on Linux through Proton/Wine — the approach managed hosts use. If you self-host on Linux, install the 32-bit libraries SteamCMD needs; if you host on Flux, the OS layer is handled for you.

How Flux plans map to these requirements

Rather than sizing hardware yourself, each Flux plan is pre-matched to a player tier: 4 GB RAM for up to 4 players, 6 GB for up to 8, and 8 GB for the full 16 — all on SSD/NVMe storage with the ports and OS handled. Plans start at $3.99/month with the first month free.

Frequently asked questions

What are the requirements for an Enshrouded dedicated server?

At least 4 CPU cores and 4 GB of RAM for a small server, scaling to 8 GB of RAM for a full 16-player world, plus 10–30 GB of SSD storage and open UDP ports 15636 and 15637. Enshrouded is more sensitive to CPU speed and RAM than to bandwidth.

How much RAM does an Enshrouded server need?

Roughly 4 GB for up to 4 players, 6 GB for up to 8 players, and 8 GB for a full 16-player server. RAM use grows with how developed your world is, so size up a tier for long-running, heavily-built worlds.

How many players can an Enshrouded server support?

Enshrouded supports up to 16 players on a single dedicated server.

What ports does an Enshrouded server need?

UDP port 15636 for game traffic and UDP port 15637 for queries by default. Both must be open and reachable from the internet, or the server will not appear in the browser.

Can an Enshrouded server run on Linux?

Yes, through Proton/Wine, since the server is a Windows application. Managed hosts including Flux run it this way; self-hosting on Linux needs the 32-bit libraries SteamCMD depends on.

Related Enshrouded guides